[SeaBIOS] Issues with ASRock E350M1
Marshall Buschman
mbuschman at lucidmachines.com
Sun Jun 5 20:22:42 CEST 2011
I picked up another sandforce SSD myself, an OCZ vertex 2 120gb.
Absolutely no issues.
I hacked around in the SeaBIOS AHCI code a bit.
Adding 100ms of wait between the port reset and the probe causes the
drive to work properly, but this is a really, really bad hack -- and
from what Kevin was saying earlier, the drive reports ready and is not.
I'm inclined to believe that Corsair did a very poor job of implementing
their firmware (which is sad, because typically, I find Corsair products
to be of high quality), and that this drive only works at all because
legacy BIOS systems take virtually forever to start, and this conceals
the failure of the Corsair firmware to behave properly.
I suppose the question is .. do we have any desire to support hideously
broken disk firmware? If so, I will hold onto the disk so we can test
with it (as nothing else that I have behaves this way -- even mechanical
disks work fine) - otherwise, I'll be returning it to the place that I
bought it from as defective, which it is.
Thanks!
-Marshall Buschman
On 6/5/2011 2:46 AM, Scott Duplichan wrote:
> Marshall Buschman wrote:
>
> ]Or not! It's back. Same issue as before.
> ]
> ]Quoting mbuschman at lucidmachines.com:
> ]
> ]> Mystery solved - the drive's shipping firmware was causing this
> ]> behavior - an upgrade to the latest firmware (2.0) resolves this.
> ]>
> ]> Thanks!
> ]> -Marshall Buschman
> ]>
> ]> Quoting mbuschman at lucidmachines.com:
> ]>
> ]>> I should mention that a 16gb Kingston SSD I have works just fine,
> ]>> as well as a 500gb traditional hard disk.
> ]>> Looks like this might be a problem with the disk itself. I know the
> ]>> Sandforce controllers do all kinds of "smart" things like
> ]>> compressing data to achieve greater throughput. I'll investigate
> ]>> and see what I can find.
>
> Hello Marshall,
>
> An SSD drive I bought for boot time testing also has the
> SandForce sf-1200 controller:
> http://www.mushkin.com/Digital-Storage/SSDs/MKNSSDCL40GB-DX.aspx
>
> I have not noticed any detection problem with it. Let me know
> if there is any experiment I could do with it.
>
> Thanks,
> Scott
>
>
> _______________________________________________
> SeaBIOS mailing list
> SeaBIOS at seabios.org
> http://www.seabios.org/mailman/listinfo/seabios
More information about the SeaBIOS
mailing list