[SeaBIOS] [PATCH v2 0/2] Boot up with a splash picture configurable, comments

Wayne Xia xiawenc at linux.vnet.ibm.com
Tue Jun 28 06:29:50 CEST 2011


     Sorry, forgot to sent this mail, following is my comments.
> On Wed, Jun 22, 2011 at 08:24:16PM +0800, Wayne Xia wrote:
>>
>> Signed-off-by: Wayne Xia<xiawenc at linux.vnet.ibm.com>
>
> Thanks.  See my comments below.
>
> [...]
>> +void raw_data_format_adjust_24bpp(u8 *src, u8 *dest, int width, int height,
>> +            int bytes_per_line_src, int bytes_per_line_dest, u8 switch_flag)
>> +{
>
> It's still not clear to me what this function does.  It seems like it
> is adjusting for extra space in the framebuffer at the end of every
> horizontal line.  However, it's unclear why BMP would use SWITCH_LINE
> and JPEG would use SWITCH_RGB or why either is needed.
>
in my test, the line sequence of contents from the BMP file need to be
reversed to show correctly, and the jpg decoder's output have a
different RGB order also. And some video mode have some more bytes per
line than the picture data, so the function adjusted it.

> The purpose of jpeg_show (and bmp_show) is to decode the picture - if
> the picture isn't decoded properly then I think the xxx_show()
> function should be fixed instead of re-copying the picture to correct
> the decoding.

now modified the bmp and jpeg decoder instead of re-copying it.
>
> [...]
>> +typedef struct tagBITMAPFILEHEADER {
>> +u8 bfType[2];
>> +u8 bfSize[4];
>
> Indentation.
>
sorry for that..., changed
>>   void
>>   enable_bootsplash(void)
>>   {
>> -    if (!CONFIG_BOOTSPLASH)
>> +    if (!CONFIG_BOOTSPLASH) {
>>           return;
>> +    }
>
> Unneeded style change.
>
changed.
> [...]
>> -    int width, height;
>> -    jpeg_get_size(jpeg,&width,&height);
>> +    bpp_require = 24;/* for better vision effect, use 24 bpp mode */
>
> This could break existing users that use 16bit or 32bit modes.
>
changed, now jpg file remains the same process as before the patch, but
I modified the jpg decoder a little to handle the situation that line
size of video buffer is different with the image buff's, and reversed
the RGB sequence in 24 bpp video mode.

> -Kevin
>


-- 
Best Regards

Wayne Xia
mail:xiawenc at linux.vnet.ibm.com
tel:86-010-82450803





More information about the SeaBIOS mailing list