[SeaBIOS] [PATCH 0/7] vgabios improvements
Gerd Hoffmann
kraxel at redhat.com
Mon Apr 14 14:22:51 CEST 2014
On Fr, 2014-04-11 at 11:31 -0400, Kevin O'Connor wrote:
> On Sun, Apr 06, 2014 at 06:59:53PM -0400, Kevin O'Connor wrote:
> > This patch series refactors the vgabios graphics mode framebuffer
> > manipulation code. It then adds in support for manipulating "direct"
> > framebuffers that modern vga modes use.
> >
> > This series (along with the followup patches for coreboot native vga
> > vgabios) is also available at:
> >
> > https://github.com/KevinOConnor/seabios/tree/testing
>
> FYI, I have pushed this patch series (as well as the follow up
> coreboot native vgabios series) to seabios master.
Updated the firmware builder to include this. If you wanna try things
out in qemu install coreboot.git package from the firmware builder repo
(http://www.kraxel.org/repos/). It's enabled for the stdvga:
coreboot-i440fx-seabios.rom: 256 kB, bootblocksize 944, romsize 262144,
offset 0x0
alignment: 64 bytes
Name Offset Type Size
cmos_layout.bin 0x0 cmos_layout 1160
pci1234,1111.rom 0x4c0 optionrom 26112
fallback/romstage 0x6b00 stage 17654
fallback/coreboot_ram 0xb040 stage 57426
fallback/payload 0x19100 payload 58083
config 0x27440 raw 3391
(empty) 0x281c0 null 96792
So you can try this:
qemu -vga std -bios /usr/share/coreboot.git/coreboot-i440fx-seabios.rom
to see it live in action.
Two problems spotted so far:
(1) ipxe hangs at rom load time.
can be worked around by adding '-net none' to the qemu cmd line.
(2) color attributes don't work correctly. Result is that you can't
figure which line in your boot menu is highlighted. Visible in
Fedora live isos (which use isolinux as boot loader) I think.
cheers,
Gerd
More information about the SeaBIOS
mailing list