[SeaBIOS] Failure to detect high-capacity SD card
Paul Menzel
pmenzel at molgen.mpg.de
Fri Feb 23 13:32:04 CET 2018
Dear Chris,
On 02/23/18 13:06, Chris wrote:
> On Fri, Feb 23, 2018 at 12:24 AM, Kevin O'Connor <kevin at koconnor.net> wrote:
>> This looks to be very similar to the issue Matt raised back in
>> October. It seems the card needs to run at 1.8 volt (instead of 3.3
>> volt), but it seems to shutdown before telling seabios that.
>>
>> Can you apply the patch at:
>>
>> https://mail.coreboot.org/pipermail/seabios/2017-October/011892.html
>>
>> set the seabios debug level to 3, and send the log again?
>
> Yes, I believe we're using the same hardware.
>
> With the patch it still fails.
>
> During boot devices were:
> * mmcblk0 internal 64GB SSD (detected).
> * mmcblk1 internal card reader with 64GB bootable card in it (fails to
> be detected).
> * External USB reader that has 2 slots, one is empty, the other has a
> 1GB microsd (detected).
>
> Log:
> https://pastebin.com/L0dhPN8G
Thank you for testing this. For the future, could you please attach log
files, so that they can be looked in the inbox when offline.
> Looks like the same problem where the card won't respond and times out.
>
> I still need to see if I can get some debugging information from a
> Linux kernel because everything works fine there. I'm not sure how to
> go about turning it on.
Kind regards,
Paul
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5174 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://mail.coreboot.org/pipermail/seabios/attachments/20180223/6e2fa905/attachment.p7s>
More information about the SeaBIOS
mailing list