<div dir="ltr">Hi guys,<div><br></div><div>I just got coreboot with SeaBIOS payload up and running on a previously unsupported system. The system is a Sun Ultra 40 M2 which is very similar to the NVIDIA l1_2pvv development board (which already has a coreboot port.)</div><div><br></div><div>Coreboot detects the VGA card and outputs the text "found VGA at PCI: 43:00.0", however, SeaBIOS does not seem to be able to detect the VGA card and doesn't seem to enumerate that bus. It would appear that the option rom is not being ran.</div><div><br></div><div>Here's a simple diagram showing roughly how devices are connected on the board: <a href="http://ibin.co/20n6DtSrgZSv" target="_blank" style="font-size:12.8000001907349px">http://ibin.co/20n6DtSrgZSv</a><br></div><div><br></div><div>Here's the console output (SeaBIOS log level 8): <a href="http://pastebin.com/jKu21dTV">http://pastebin.com/jKu21dTV</a></div><div><br></div><div>SeaBIOS also detects USB mass storage and hard disk drives, but can not boot from them. There's a HALT statement and a bunch of errors (also seen in the log file.) The boot device was a USB mass storage device with linux installed and boots successfully with the vendor bios.</div><div><br></div><div>Thanks in advance!</div><div><br></div><div>-Nick</div><div><br></div></div>