SeaBIOS (version rel-1.9.0-43-g76327b9) BUILD: gcc: (coreboot toolchain v1.33 November 25th, 2015) 5.2.0 binutils: (GNU Binutils) 2.25 SeaBIOS (version rel-1.9.0-43-g76327b9) BUILD: gcc: (coreboot toolchain v1.33 November 25th, 2015) 5.2.0 binutils: (GNU Binutils) 2.25 Found coreboot cbmem console @ dffde000 Found mainboard PC Engines APU1 Relocating init from 0x000e4220 to 0xdfc0b400 (size 47968) Found CBFS header at 0xffe00138 multiboot: eax=0, ebx=0 Found 27 PCI devices (max PCI bus is 05) Copying SMBIOS entry point from 0xdfc5f000 to 0x000f70a0 Copying ACPI RSDP from 0xdfc70000 to 0x000f7070 Copying MPTABLE from 0xdfc94000/dfc94010 to 0x000f6e90 Copying PIR from 0xdfc95000 to 0x000f6e60 Using pmtimer, ioport 0x808 WARNING - Timeout at tis_wait_sts:107! Scan for VGA option rom EHCI init on dev 00:12.2 (regs=0xf7f04020) WARNING - Timeout at i8042_flush:71! EHCI init on dev 00:13.2 (regs=0xf7f05020) Found 1 lpt ports Found 2 serial ports AHCI controller at 11.0, iobase f7f03000, irq 11 EHCI init on dev 00:16.2 (regs=0xf7f06020) OHCI init on dev 00:12.0 (regs=0xf7f00000) Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0 OHCI init on dev 00:13.0 (regs=0xf7f01000) AHCI/0: registering: "AHCI/0: SB mSATA SSD ATA-10 Hard-Disk (14318 MiBytes)" OHCI init on dev 00:16.0 (regs=0xf7f02000) Searching bootorder for: /pci@i0cf8/*@11/drive@1/disk@0 AHCI/1: registering: "AHCI/1: Corsair CSSD-F40GB2-A ATA-8 Hard-Disk (38164 MiBytes)" Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0 Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1 USB MSC vendor='Multiple' product='Card Reader' rev='1.00' type=0 removable=1 Device reports MEDIUM NOT PRESENT scsi_is_ready returned -1 Unable to configure USB MSC drive. Unable to configure USB MSC device. Searching bootorder for: /pci@i0cf8/usb@12,2/storage@5/*@0/*@0,0 Searching bootorder for: /pci@i0cf8/usb@12,2/usb-*@5 USB MSC vendor='WD' product='Elements 10B8' rev='1012' type=0 removable=0 Wcall16 with invalid stack